Solar system kit designed for homes with an area of approximately 100 sqm. The system will ensure domestic hot water needs and will cut the cost for house heating by 35%. Equipped with 100 vacuum tubes (4 x CS25) and a 500L hygienic buffer tank, with two coils.
Each tube works independently and the damage of a tube does not cause the solar system to malfunction but only to reduce the absorption and heating capacity.
The vacuum tubes are equipped with heat-pipes and do not contain water. The solar panels with vacuum tubes offer the highest performance of capturing the solar energy. The solar tubes are made of borosilicate glass inside which are chemically deposited three layers of absorption that amplify the effect of solar radiation.The vacuum tube ensures optimal absorption of solar radiation and minimum heat-loss up to the collector ramp. The cylindrical shape of the tubes gives them the ability to capture optimal sun rays throughout the day, thus ensuring a good performance even in partly cloudy sky conditions.
System components:
- Solar collector 25 tubes – 4 pcs;
- Hygienic buffer 500L, S2;
- Solar automation SR658;
- Pumping group Panosol P6;
- Expansion vessel equipped – 35 L;
- Solar ventilator;
- Solar antifreeze – 40 kg;
- 3 way diversion valve.
Warranty:
- 10 years solar collector;
- 3 years hygienic buffer;
- 2 years for pumping group, solar automation, expansion vessel, solar vent
- 1. CS25 heat-pipe solar collector (25 vacuum tubes):
- Dimensions (mm) : 2000 x 1990 x 125
- Weight : 76 kg
- Absorption surface : 2.59 mp
- Total surface : 3.98 mp
- Liquid capacity : 2083 ml
- Maximum pressure : 800kpa/116Psi
- Heat-pipe stagnation temperature : 180°C
- Vacuum tube stagnation temperature : 280°C
- Maximum output : 1615 W / 5525 Btu
- Ideal flow rate : 2.5 l/min
- Pressure loss at ideal flow rate : 1.4 KPa (14 mbar)
- Maximum flow rate : 18 l/min
- Daily heating capacity (Δ40°C) : 175-250 l
! The anchoring and tilting systems are accessories and should be ordered separately, considering installation needs.
2. 500L, double coil, hygienic buffer tank, with stainless steel coil for DHW:
- Height : 1765 mm;
- Diameter : ᴓ800 mm;
- Insulation : 80 mm (PU rigid);
- Heat exchanger surface S1/S2 : 1.85/1.15 mp;
- DHW heat exchanger surface : 4.65 mp;
- Coil volume S1/S2: 12.15/7.53 litri;
- DHW coil volume : 36.66 litri;
- Nominal pressure : 0.3 Mpa;
- Heat loss : 71 W;
- Weight: 161 kg
3. SR658 solar controller
- Solar applications available : 19;
- Maximum sensors : 8;
- Available relays : 7;
- Maximum collector arrays monitored: 2;
- Maximum tanks monitored: 2
4. Panosol P6 pump station:
- Grundfos-Solar 15-65 solar pump, 2-15 l/min flow rate;
- ball valve with integrated sense valve, with thermometer and connection for the safety group;
- flow meter with closure and adjustment, with side valve for filling and emptying;
- 6 bar safety valve;
- 3/4″ outer connection to the expansion vessel
- 10 bar pressure gauge;
- ball valve for filling and emptying;
- wall mounting equipment;
- insulation.
5. 35L expansion vessel (connection included)
- Max. working pressure: 10 bar;
- Max working temperature : 110°C;
- Connection size: 3/4″
6. Solar vent
- Maximum working temperature: 180°C;
- Connection size: 1/2″
7. Solar antifreeze liquid -28°C
- propyl en glycol solar antifreeze liquid;
- working temperature range : -28°C/180°C.
